Gateway E3400 System Manual page 64

6
Install the following devices on the new system board:
Processor. (See "Replacing or adding a processor" on page 59 for
instructions.)
DIMMs. (See "Adding or replacing memory" on page 43 for
instructions.)
AGP graphics card. (See "Replacing the AGP card" on page 49.)
Devices from the old system board that are not included with the
new board, such as processor retention brackets.
To replace the system board tray assembly:
1
Align the two hinges on the sides of the system board tray over the pins
on the chassis.
Hinges
2
Move the release handle on the tray assembly to an outward position.
Hinge pins
Replacing the system board
57