Gateway E3400 System Manual page 38

5
From the rear of the drive cage, push the diskette drive toward the front
of the chassis and through the front bezel.
Diskette
drive
6
Place the new drive into the drive cage. Make sure the threaded holes
on the diskette drive align with the locking tab holes on the drive cage.
7
Replace the drive locking tab.
8
Connect the power and data cables to the drive.
9
Replace the right panel. (See "Replacing the side panels" on page 23 for
instructions.)
10
Reconnect the power cord and all other cords you removed, then turn
on the system.
Replacing or adding drives
31