Gateway E3400 System Manual page 91

Probable Cause
The CD drive needs to be
added as new hardware.
The secondary IDE device
may be disabled.
The CD cables are not
installed correctly.
The CD drive may be
defective.
84
Troubleshooting
Solution
From the Control Panel window (Start |
Settings | Control Panel), double-click Add
New Hardware. Follow the directions for
adding the drive.
Restart your computer, then press F1 to enter
the BIOS Setup utility program. From the
Advanced | IDE Configuration menu, set the
IDE Controller to Both and the Secondary
IDE Master to Auto.
Open the system and check all cables
between the CD controller and the CD drive.
Replace the CD drive.