Gateway E3400 System Manual page 67

4
Unhook the metal clip from the tab on the processor socket by pressing
down on the clip, then pulling out on the clip.
Metal clip
Tab
5
Lift the heat sink at an angle and unhook the clip from the other tab.
Lift the heat sink off of the processor.
To remove the processor:
1
Open the locking level on the processor socket by moving the lever
slightly out to the side and then lifting it up 90 degrees.
Heat sink
Locking
lever
2
Lift the old processor straight up and out of the socket.
60
Replacing and Adding System Components
Tab
Processor