www.gateway.com
Secure the diskette drive into the carrier with the two screws (6) included
7
in the optional diskette drive installation kit.
Push the diskette drive assembly into the drive bay until it snaps into place.
8
Connect the data and power cables to the back of the diskette drive.
9
Reinstall the bezel, if required, by snapping it into place on the front of
10
the chassis.
Follow the instructions in
11
Reconnect all power cords and peripheral device cables, then turn on the
12
server.
Installing and removing drives
"Closing the server case" on page
30.
37