Gateway Server E-9520T User Manual page 20

CHAPTER 2: Setting Up Your Server
14
Swing the bezel out 45° from the front of the case, then disengage the tabs
6
on the right side of the bezel from the chassis and remove it.
To reinstall the bezel, align the right side of the bezel with the right side
7
of the chassis at a 45° angle, then insert the three tabs on the right side
of the bezel into the slots in the chassis.
Swing the left side of the bezel in to the chassis until the three tabs on
8
the left side of the bezel snap into place.
Close the server case by following the instructions in
9
case" on page 30.
www.gateway.com
"Closing the server