Remote Node Tcp/Ip Configuration; Lan-To-Lan Application; Figure 5-1. Lan-T O-Lan Application With Tcp/Ip - ZyXEL Communications Prestige 100MH User Manual

Prestige 100MH PSTN Router/Hub
Chapter 5

Remote Node TCP/IP Configuration

This chapter shows you how to configure the TCP/IP parameters of a remote node for

LAN-to-LAN application.

5.1 LAN-to-LAN Application
A typical LAN-to-LAN application is to use your Prestige to call from a branch office to the
headquarters, as depicted in the following Figure 5-1.
Corporate LAN
Branch Office LAN
Prestige 100MH
Prestige 100MH
Figure 5-1. LAN-to-LAN Application with TCP/IP
For the branch office, you need to configure a remote node in order to dial out to the
headquarters. Additionally, you may also need to enter static routes if some services reside
beyond the immediate remote LAN.
Chapter 5 Remote Node TCP/IP Configuration
5-1