Table of Contents
Advertisement
Test Print menu
Item
PRINT ID CHECK
PATTERN
Shutdown menu
Item
SHUTDOWN START
Print Menu
Item
COPIES
DUPLEX
BINDING
OUTPUT BIN
JOB OFFSET
PAPER FEED
AUTO TRAY
SWITCH
TRAY SEQUENCE
Value
Execute
Value
Execute
Value
1 to 999
On; Off
Long edge; Short edge
Face Up; Face Down
Face Down
Face Down
Face Down
On; Off
On
On
On
Tray 1; Tray 2; Tray 3;
Tray 4; Tray 5; MP Tray
On; Off
Down; Up; Paper feed
tray
SETTING UP > 46
Description
Prints ID check pattern to detect bad ID.
Displayed only if "TEST PRINT MENU" of
the System Maintenance Menu is set to
ENABLE.
Description
Shut down sequence for the printer,
and is recommended to be used when
the hard disk is fitted to prevent any
loss of data.
Description
Sets the number of copies.
Specifies two-sided (duplex) printing
if the optional duplex unit is installed.
Sets binding for duplex printing. Only
displayed if duplex is ON.
Specifies output bin.
Sets job offset on or off.
Selects source of paper feed. Tray 2 to
5 only displayed if fitted.
Automatic switching to next tray when
tray in use empties.
Specifies selection order priority for
switching Auto Tray Select/Auto Tray
Switch.
Advertisement
Table of Contents
