Table of Contents
Advertisement
S
HUTDOWN MENU
This item should always be selected before switching the printer off, to ensure that no data
is lost.
ITEM
SHUTDOWN START
P
RINT MENU
This menu provides adjustment of various print job related functions.
ITEM
COPIES
DUPLEX
BINDING
PAPER FEED
AUTO TRAY SWITCH
TRAY SEQUENCE
MP TRAY USAGE
MEDIA CHECK
OVERRIDE A4/LT
RESOLUTION
SETTINGS
EXPLANATION
EXECUTE
Performs controlled shutdown of the printer.
Only power the printer off when the display indicates that
shutdown is complete.
SETTINGS
1-999
ON
OFF
LONG EDGE
SHORT EDGE
TRAY1
TRAY2
MP TRAY
ON
OFF
DOWN
UP
PAPER FEED TRAY
DO NOT USE
WHEN MISMATCH
ENABLE
DISABLE
YES
NO
600DPI
600x1200DPI
600DPI M-LEVEL
Menu functions > 43
EXPLANATION
Enter the number of copies of a document to be printed
from 1 to 999.
Switches the Duplex (2 sided) function ON/OFF.
Sets the default binding to SEF or LEF.
Display condition: duplex setting is enabled.
"DUPLEX" on page 43.
Selects the default tray for paper feed, Tray 1 (upper),
Tray 2 (lower, if installed) or MP Tray (multi purpose
tray).
If two trays contain identical paper, the printer can
switch to an alternative source when the current tray
runs out in the middle of a print job.
Determines tray sequence order when automatically
switching.
If a document to be printed demands a paper size not
installed in the selected tray, the printer can
automatically feed from the multi purpose tray instead.
If this function is not enabled, the printer will stop and
request the correct size of paper to be loaded.
Determines whether the printer check the size of paper
loaded matches that required for the document sent to
print.
If enabled, when the paper size of a job is set to A4 but
there is no A4 set in the printer, if there is Letter paper
in the printer, the job will be printed on Letter paper
without requesting the user to fill the paper tray with A4
paper.
Similarly, when the paper size of a job is set to Letter
but there is no Letter set in the printer, if there is A4
paper in the printer, the job will be printed on A4 paper
without requesting the user to fill the paper tray with
Letter paper.
Sets the default resolution for printing (dots per inch).
600x1200DPI uses more memory and requires more
time to process, but prints at a higher quality.
See
Advertisement
Table of Contents
