Table of Contents
Advertisement
FX Emulation
Item
CHARACTER PITCH
CHARACTER SET
SYMBOL SET
LETTER 0 STYLE
ZERO CHARACTER
LINE PITCH
WHITE PAGE SKIP
CR FUNCTION
LF FUNCTION
LINE LENGTH
FORM LENGTH
TOF POSITION
LEFT MARGIN
FIT TO LETTER
TEXT HEIGHT
CONT PAPER
MODE
Value
10 CPI; 12 CPI; 17 CPI;
20 CPI; PROPORTIONAL
Set 1; Set 2
IBM 437
Disable; Enable
Normal; Slashed
6 LPI; 8 LPI
OFF; ON
CR; CR+LF
LF; LF+CR
80 COLUMN; 136
COLUMN
11 inch; 11.7 inch;
12 inch
0.0 inch - 1.0 inch
0.0 inch - 1.0 inch
Disable; Enable
Same; Diff
Off; On
SETTING UP > 56
Description
Specifies character pitch in this
emulation.
Specifies a character set.
Specifies a symbol set.
Specifies the style that replaces 9BH
with o and 9DH with a zero.
Sets the zero to be slashed or
unslashed.
Specifies the line spacing.
Specifies whether or not the printer
ejects a blank sheet.
Not available on duplex operation.
Sets functionality on receipt of CR
code.
Sets functionality on receipt of LF
code.
Specifies the number of characters
per line.
Specifies the length of paper.
Specifies the distance of print from
the top edge of the paper.
Specifies the distance of print from
the left hand edge of the paper.
Sets the printing mode that can fit
print data, equivalent to 11 inches (66
lines), in the LETTER-size printable
area.
Sets the height of a character.
SAME: Regardless of CPI, same
height.
DIFF: As CPI, character heights vary.
Sets edit direction of paper to
landscape.
Advertisement
Table of Contents
