Troubleshooting; Lcd Messages - Oki C9300dn User Manual

Table of Contents

Advertisement

TROUBLESHOOTING

LCD MESSAGES

The liquid crystal display (LCD) on the control panel indicates the
printer status and if there is a problem with the printer. Status and
error messages are listed below together with an explanation of what
each message means:
LCD Message
***** DRUM NEAR LIFE
***** EMPTY
***** NEAR END
***** TONER LOW
***** TONER SENSOR
ERROR
BELT UNIT MISSING
CANCELLING JOB
CENTRO I/F ERROR
CHANGE ***** IMAGE DRUM
CHANGE BELT UNIT
CHANGE FUSER UNIT
CHANGE PAPER TO *****
CHECK *****
CHECK BELT UNIT
CHECK DUPLEX
CHECK FUSER UNIT
CHECK IMAGE DRUM
COLLATE FAIL
COLOUR ADJUSTING
COLOUR BALANCE ADJUST
Meaning
An image drum is nearing the end of its life. (*****
indicates colour)
Warning that Tray ***** is empty. MP Tray is Tray 0.
The paper in the selected ***** is nearly finished. (*****
indicates paper tray).
Toner is low (***** indicates colour).
Error with the toner sensor (***** indicates colour). Call
for service.
Transfer belt unit is missing.
Cancelling the current job.
Centronics interface error (parallel interface).
Change the image drum (***** indicates colour).
Change the transfer belt.
Change the fuser unit.
Paper must be changed to correct paper size and/or
media type (***** indicates size or media type).
Check Tray ***** for paper jam. MP tray is Tray 0.
Check the transfer belt for paper jam, correct
installation, etc.
Check the duplex unit for paper jam, correct installation,
etc.
Check the fuser unit for paper jam, correct installation,
etc.
Check the image drum for correct installation, etc.
Colour will be indicated.
Collating of multiple copies has failed.
Adjusting head so that colours do not shift on to each
other.
Adjust the colour balance.
TROUBLESHOOTING > 157

Advertisement

Table of Contents
loading

This manual is also suitable for:

C9300hdnC9300nC9500dnC9500hdn

Table of Contents