Table of Contents
Advertisement
LCD Message
RAM CHECK
REGISTRATION ADJUST TEST
REGISTRATION ERROR
REMOVE THE PAPER
RS232C FRAMING ERROR
RS232C OVERFLOW ERROR
RS232C OVERRUN ERROR
RS232C PARITY ERROR
SERVICE CALL
SHUTDOWN
SIZE MISMATCH
STACKER FULL
UNSUITABLE SIZE
USB I/F ERROR
WARMING UP
Meaning
RAM is being checked after switching printer on.
Registration adjustment being tested.
An error has occurred setting up the registration.
Indicates wrong paper being used.
Serial framing error. Check configuration of serial card.
Serial overflow error. Check configuration of serial card.
Serial overrun error. Check configuration of serial card.
Serial parity error. Check configuration of serial card.
A serious error has occurred. Call for service.
Starts the shutdown procedure to protect the file system
on hard disk.
Change paper to correct size/type. Press On-line to
continue.
Stacker is full. Remove the paper.
Indicates wrong paper size.
USB interface error has occurred.
The printer is warming up.
TROUBLESHOOTING > 159
Advertisement
Table of Contents
