Oki C9300dn User Manual page 66

Item
DISK
MAINTENANCE
SYSTEM ADJUST
MENU
MAINTENANCE
MENU
USAGE MENU
COLOUR MENU
BLOCK DEVICE
MENU
PEAK POWER
CONTROL
Value
Enable/Disable
Enable/Disable
Enable/Disable
Enable/Disable
Execute
Initialise lock -
YES
NO
Normal/Low
SETTING UP > 66
Description
Enable/Disable DISK MAINTENANCE MENU.
Set to Disable, DISK MAINTENANCE MENU is
not displayed.
Enable/Disable SYSTEM ADJUST MENU.
Set to Disable, SYSTEM ADJUST MENU is not
displayed.
Enable/Disable MAINTENANCE MENU.
Set to Disable, MAINTENANCE MENU is not
displayed.
Enable/Disable USAGE MENU.
Set to Disable, USAGE MENU is not
displayed.
This is the menu to reset the TRC data that
had been stored (retained for tracking).
For example, correct values could not be
taken due to "out of order" situation.
This is mainly for maintenance purposes and
not ordinarily used.
Enable/Disable setting changes that involve
Block device (HDD, FLASH) initialisation.
If set to YES, the operator panel does not
show FLASH INITIALISE ITEM and PS FLASH
RESIZE ITEM in DISK MAINTENANCE and
MEMORY MENU.
Sets PEAK POWER CONTROL.