Oki C9300dn User Manual page 61

Memory menu
Item
RECEIVE BUFF SIZE
RESOURCE SAVE
FLASH INITIALIZE
PS FLASH RESIZE
Disk maintenance
(Only appears if a hard disk is fitted.)
Item
HDD INITIALIZE
PARTITION #1
PARTITION #2
PARTITION #3
HDD FORMATTING
System adjust menu
Item
X ADJUST
Y ADJUST
DUPLEX X ADJUST
DUPLEX Y ADJUST
TRAY 1 A3 NOBI
Value
Auto; 0.5 Mb; 1 Mb; 2
Mb; 4 Mb; 8 Mb; 16
Mb; 32 Mb
Auto; Off; 0.5 Mb; 1
Mb; 2 Mb; 4 Mb; 8
Mb; 16 Mb; 32 Mb
Execute
1Mb; 0.5Mb; 1.5Mb;
0Mb
Value
Execute
Common; PCL; PS
Common; PCL; PS
Common; PCL; PS
Partition 1; Partition
2; Partition 3
Value
0.00 mm; +0.25 to +2.0
mm; – 2.0 to –0.25 mm
0.00 mm; +0.25 to +2.0
mm; – 2.0 to –0.25 mm
0.00 mm; +0.25 to +2.0
mm; – 2.0 to –0.25 mm
0.00 mm; +0.25 to +2.0
mm; – 2.0 to –0.25 mm
A3 Nobi; A3 Wide; A3
Tabloid extra
SETTING UP > 61
Description
Sets the size of the receive buffer and
will depend on the amount of memory
installed in the printer.
Set the size of the font cache area and
will depend on the amount of memory
installed in the printer.
Initialises flash memory if fitted.
Changes the size of the flash memory
area. NOTE: Special data is stored in
the Flash Memory, therefore you
cannot specify 100%.
Description
Partitions hard disk and formats
each partition.
Sets usage of partition number 1.
Sets usage of partition number 2.
Sets usage of partition number 3.
Formats specified partition.
Description
Adjusts overall print position
horizontally in 0.20 increments.
Adjusts overall print position
vertically in 0.20 increments.
Adjusts overall print position of
print face horizontally in 0.20
increments.
Adjusts overall print position of
print face vertically in 0.20
increments.
Sets Tray 1 large paper size.