Oki C9300dn User Manual page 50

Colour menu
Item
AUTO DENSITY
MODE
ADJUST DENSITY
COLOUR TUNING
CYAN, MAGENTA,
YELLOW OR BLACK
HIGHLIGHT
CYAN, MAGENTA,
YELLOW OR BLACK
MID-TONE
CYAN, MAGENTA,
YELLOW OR BLACK
DARK
Value
Auto; Manual.
Execute
Print pattern
0+1+2+3-3-2-1
0+1+2+3-3-2-1
0+1+2+3-3-2-1
SETTING UP > 50
Description
Select whether density adjustment
and Toner Response Curve (TRC)
compensation is automatic.
Auto: Density adjustment is
automatically run under specified
conditions, and reflected in the TRC
compensation.
Manual: The printer does not
automatically run density adjustment.
If EXECUTE is selected, the printer will
immediately adjust density and reflect
it in the TRC compensation. Density
adjustment must be executed when
the printer is idling. It may become
invalid if executed in any other state.
Prints the pattern for the user to adjust
TRC. Ordinarily this function is not
needed because TRC is automatically
adjusted to the recommended levels
through density adjustment and TRC
compensation. This function permits
TRC adjustment to your requirement
by using the adjustment menu of
HIGHLIGHT, MID-TONE, and DARK for
each of CMYK. Adjustment results will
be reflected as offset values
(additions) to the corrections made
through the Adjust Density/TRC
Compensation function.
Adjusts HIGHLIGHT (light area) of
Cyan, Magenta, Yellow or Black TRC.
Plus indicates adjustment toward a
darker level and minus toward lighter.
Adjusts MID-TONE of Cyan, Magenta,
Yellow or BlackTRC.
Plus indicates adjustment toward a
darker level and minus toward lighter
Adjusts DARK of Cyan, Magenta,
Yellow or BlackTRC.
Plus indicates adjustment toward a
darker level and minus toward lighter