Oki C9300dn User Manual page 59

Parallel menu
Item
PARALLEL
BI-DIRECTION
ECP
ACK WIDTH
ACK/BUSY
TIMING
I-PRIME
OFFLINE RECEIVE
USB menu
Item
USB
SOFT RESET
OFFLINE RECEIVE
Value
Enable; Disable
Enable; Disable
Enable; Disable
Narrow (0.5µs);
Medium (1.0µs); Wide
(3.0µs)
ACK-in-Busy; ACK-
while-Busy
3 micro-sec; 50 micro-
sec; Disable
Enable; Disable
Value
Enable; Disable
Enable; Disable
Enable; Disable
SETTING UP > 59
Description
Selects parallel (Centronics) interface.
Selects bi-directional communication.
Selects ECP mode.
Sets ACK width for compatible
reception.
Sets output order for ACK and BUSY
during reception.
ACK IN BUSY: BUSY=LOW to the end of
the ACK pulse
ACK WHILE BUSY: BUSY=LOW to the
centre of the ACK pulse.
Sets or disables the i-Prime signal
When set to Enable, this function
maintains reception without changing
the interface signal, even though an
alarm occurs.
The interface stays open even if the
operator panel Off-line switch is
pressed.
The interface issues a BUSY signal only
when the receive buffer is full or when a
service call occurs.
Description
Selects USB interface.
Selects use of soft reset command.
When set to Enable, this function
maintains reception without changing
the interface signal, even if an alarm
occurs. The interface stays open even
if the operator panel Off-line switch is
pressed. The interface issues a BUSY
signal only when the receive buffer is
full or when a service call occurs.