Oki C9300dn User Manual page 58

Item
PEN 0 - 15
COLOUR
ORIGIN
PEN 0 FUNCTION
CHARACTER PITCH
SELECT PAPER
Value
0 - 255
Pen 0: 0
Pen 1: 1
Pen 2: 2
Pen 3: 3
Pen 4: 4
Pen 5: 5
Pen 6: 6
Pen 7: 7
Pen 8: 8
Pen 9: 12
Pen 10: 19
Pen 11: 27
Pen 12: 35
Pen 13: 68
Pen 14: 100
Pen 15: 110
Corner
Center
White pen
End plot
6 CPI; 9 CPI
Edit size; Plotsize all;
Plotsize equip
SETTING UP > 58
Description
Specifies the colour of Pen 0 - 15 for
the menu palette to be used in GL/2
drawings.
The specified colour is invalid if
PALETTE is not selected as PALETTE
SOURCE.
This will not affect GL/2 mode in PCL.
Specifies the origin in GL/2 drawings.
This will not affect GL/2 in PCL.
(The origin in GL/2 mode in PCL is in
the lower-left corner.)
Specifies the designation of Pen 0 in
GL/2 drawings. If END PLOT is set, the
command to select PEN 0 will prompt
printing, then ejecting.
This will not affect GL/2 mode in PCL.
Specifies the default size of characters
in GL/2 drawings.
This will not affect GL/2 mode in PCL.
Specifies the method to determine the
paper size in GL/2 drawings.
EDITSIZE selected - the paper
appropriate for the Edit Size in the
menu will be selected.
PLOTSIZE selected - the paper whose
size is larger than, and closest to, the
specified Plot Size value will be
selected from all the usable paper (all)
or those loaded in the printer (equip).
This will not affect GL/2 mode in PCL.