Table of Contents
Advertisement
English
2.
If documents are stuck part way through the document feeder, the
display may prompt you to reload the document.
3.
Press the STOP key again and your fax machine will feed the
document the rest of the way through the document feeder.
Note:
If your fax machine cannot feed your document through the
document feeder, refer to "Problem Solving".
Receiving faxes manually
Note:
Receiving faxes manually is not possible when the ISDN option
is fitted.
Your fax machine receives faxes automatically unless the fax machine has
been set to the manual receive [TEL] mode. If your fax machine is set to
the manual receive [TEL] mode, follow the instructions below.
1.
When your telephone or fax machine rings, pick up the telephone
handset. If the call is a voice call, start speaking to the caller.
2.
If the call is a fax call, or if a person wishes to fax you a document
after having a conversation, press the START key.
3.
When MANUAL START appears on the display, hang up the
handset.
Note:
You can also tell your fax machine to start fax reception by
entering your 2 digit code for remote receive using your
telephone
"Programming".
4.
After you receive the fax, a long beep tells you that the reception
was successful.
Receiving faxes in memory
Your fax machine automatically receives messages into memory and does
not immediately print them in the following situations.
Memory reception
When your fax machine has been set to Memory Reception Mode [MEM],
any received faxes are stored in the memory of your fax machine and are
not automatically printed. The display indicates whether any faxes have
been received during memory reception mode.
48
keypad.
Refer
to
"Remote
Receive"
in
Advertisement
Table of Contents
