Table of Contents
Advertisement
English
Installing an external handset
If you purchased an optional external handset with your fax machine,
follow these instructions to install it.
Note:
The external handset cannot be used if the ISDN option is
installed, as voice communication is not supported on this fax
machine when using ISDN
1.
Insert the telephone cable supplied into the socket located on the
bottom of the cradle and feed the cable to the back of the cradle.
2.
Using the screw supplied, connect the handset cradle to its base.
3.
Position the handset cradle on the left side of the fax machine.
4.
Plug one end of the handset cable into the handset. Then plug the
other end of the handset cable into the socket located on the front of
the cradle. Place the handset in the cradle.
5.
Feed the telephone cable from the back of the cradle through the
cable run located on the back of the fax machine.
6.
Insert the other end of the telephone cable into the TEL socket on
the back of the fax machine.
22
Advertisement
Table of Contents
