Digital Link Hd - Loewe Xelos 32 LED Operating Instructions Manual

External devices
Adjust Geometry (only possible with certain signals)
This allows you to shift the picture (horizontally and vertically) so that it
fills the entire screen.
➠ When connecting a PC to an HDMI socket of the TV set, set the out-
put signal at your PC beforehand so that it corresponds to one of the
signals in the table on page 110.
MENU: Call TV menu.
Select Picture,
go to the menu line below.
Select more ...,
OK call.
Select PC IN display,
go to the menu line below.
MENU TV
Picture
PC IN display
Picture horizontal
66
Select the desired setting,
go to the menu line below.
Make settings.
- 94
Picture vertical

Digital Link HD

Digital Link HD ( HDMI CEC)
The Digital Link HD (HDMI CEC) system operation allows Loewe television
sets to transmit the remote control signals via the HDMI connection of a
TV set to compatible HDMI devices, such as e.g. Loewe AudioVision. You
can therefore set up a concealed CEC capable HDMI device.
Concealed installation of HDMI devices
For this, first assign the HDMI CEC function with Code 22 to the required
device button (REC, DVD or AUDIO) as described on page 102.
Now assign the Digital Link HD function to the used HDMI device.
Assign HDMI device
➠ The CEC capable HDMI device is connected to one of
the HDMI sockets of the TV set and switched on.
Press required button for 5 seconds.
A selection menu appears on the TV set.
HINT
Here you select the device which you want to switch over your remote control
to with the key. After confirming the selection with OK all remote control
AUDIO
commands are passed on to the selected device via the TV set in future when
you press this key.
SELECT HDMI DEVICE FOR KEY
AudioVision
No device
Adopt
OK
Select required device from the list.
OK Adopt.
From now on, the commands of the remote control are
communicated from the TV set to the HDMI device, if
the corresponding device button (REC, DVD or AUDIO)
has been pressed previously.
AUDIO
OK