... with the numeric keys of the remote control Assignment of digital audio inputs and outputs ... via the station table Connect Loewe DVD Preceiver Auro 8116 DT and Tremo loudspeaker Calling up audio/video stations - AV selection system Basics about the menu operation Connecting other audio amplifi...
Remote control RC4 – TV functions Sound off/on Switch on/off – to standby Switching over to operate VCRs Switching over to operate the TV Switching over to operate DVD players Picture menu on/off Timer overview on/off Sound menu on/off DISC-MENU Personal/factory values for picture and sound Radio mode on/off (back to TV mode) RADIO...
Control unit Display: red: standby green: operation Headphones connection green and red: S-VHS connection (AVS) timer recording, (i.e. for camcorder) EPG data entry Video input (AVS) or radio mode Audio input right Audio input left Function key – Select program down, in menu: select Select program up, in menu: select...
• Always switch off the screen when not in use. With the remote control you can control three Loewe units, in addition to • Reduce contrast and brightness as far as possible. this TV set also a Loewe video recorder and a Loewe DVD player.
Use the wall holder WM53, Loewe order no. 63493 A10. • This equipment is designed for domestic and offi ce environments and must not be used in rooms with high humidity (e.g. bathroom, sauna) or mounted on a rack high concentrations of dust (e.g.
Page 8
• Place the TV set on a level, fi rm base. The set should not protrude at the front when installing in cabinets or shelves. Only use original accessories if possible, e.g. Loewe wall holders and stands. Never let children handle the TV unattended.
Then push the cover back on from the bottom until it snaps in. Set the remote control for operating the TV Push TV-key How to operate other Loewe equipment is described on page 29. Switching on Switch on the set with the ON/OFF button on the rear of the screen.
Switching off Then log in your video equipment, decoder and Loewe audio system with If the TV set is switched on, you can switch it to the co.nnection wizard and connect these to the TV according to the dis- standby using the blue ON/OFF button of the played connection diagram.
Daily operation Changing channels ... via the station table Call the channels preview with OK ... with the P+/P– buttons on the remote control Channel overview COMP.IN 6 3SAT HDMI/DVI 7 S–RTL 8 N–TV 9 DSF 10 TM3 Channel up/down V–...
Daily operation Basics about the menu operation If you want to make other sound settings, move up with 5 to “Bass“ and select with34e.g. “others“. You can also move up further with 5 to “Sound“ and select other We show you how to navigate with the menus with the TV menu as an settings iln the TV menu.
Daily operation Adjusting the sound Setting the picture Volume and other frequently used sound settings Open the Picture menu Setting the volume INFO Picture V– Picture adjustment more ... Volume Contrast Colour Sharpness normal P– you can have other sound settings displayed with5 ... select the picture function to be set with 34and with 6 to the appropriate selection ...
Modes of operation TV mode Show status display Show/hide status In initial installation and daily operation, the TV set is in TV mode. This is 1 ARD Eifellandschaft 14:30 - 15:15 Stereo also the case when none of the other modes of operation such as EPG, 14:42 Teletext, PIP or Radio has been selected.
Modes of operation Select picture format Digital Link Plus Transmission of the program data from the TV set to the video/DVD recorder The TV set sets the best picture format automatically when if a recorder with Digital Link Plus is recorded. AMD is switched on.
Modes of operation Miscellaneous (settings) Picture in picture (PIP) On screen displays Picture in picture displays are possible if the set has a digital satellite tuner Defi ne the content of the status display here and switch the automatic info in addition to the TV cable tuner or when playing a connected DVD player, texts off or on: VCR etc.
Modes of operation Preview stations in the PIP picture PIP type: Small picture The frame around the PIP must be green. If it is not, press You can have the PIP picture displayed as a small picture. You will see a the green button.
Modes of operation Program guide – EPG You have direct access to the selection lines to pre-select the day, the time, the station and the topic. blue colour button: Call Select date/time/station/topics EPG is the electronic program guide for TV programs. With this system, you can easily fi...
Modes of operation Programming recording for recorders Data entry You prepare the station marked with the 65 buttons for recording by After these settings or every time the switch is set off with the mains pressing the red button. In the following menu you confi rm the timer data switch, the data must fi...
Modes of operation Teletext mode Scroll in multiple pages. You can see which multiples pages can be called in the bottom menu line. Teletext transmits information such as news, weather, sport, program – Zeitplan Fußball 1 2 3 4 5 6 7 8 9 10 11 12 previews and subtitles.
Modes of operationt Program timer recordings Radio mode A video or DVD recorder must be connected and logged in. Call the program pages of the current station with the Record button • You can only receive radio programs via DVB. in teletext mode.
Operating additional equipment Login and connect equipment Search for and store the station of the video recorder (if no Euro AV cable is available) Switch on the test station on the VCR or insert a recorded tape and start You have logged in and connected all connected equipment in the initial playback.
(e.g. in a rack). You can control the recorder with the TV set. Note: If channel 0 (Video) is called and a switching voltage is applied to If you have a Loewe recorder with both systems, you can use all the advan- AV1/AV2, the TV set switches automatically to this signal.
AUDIO DIGITAL The digital TV sound or the digital sound of a connected auxiliary device is only audible via an external digital audio amplifi er (e.g. Loewe Auro system). Surround Amplifier...
Sound menu, select “Sound via“ and then “TV“. If you want to listen to the ceiver. Plug the white plug (without kink protection) into the cubic socket sound over the Loewe Auro system, select “Auro“ under “Sound“. on the subwoofer For TV as a center loudspeaker connect “AUDIO IN C” on the TV set to “PRE OUT C”on the DVD Preceiver with a cinch cable.
Operating additional equipment Connecting other audio amplifi ers or Select “Sound transmission“ “analog“ for analog audio amplifi ers. The sound for the analog amplifi er is transmitted via the AUDIO OUT L/R con- active speakers nections of the TV to the audio amplifi er. Connect the amplifi er with two cinch cables.
Operating additional equipment HDMI (DVI) connection VGA/XGA connection The HDMI connection (High Defi niton Multimedia Interface) allows digital You can connect a PC or a Set Top Box (STB) and therefore use the TV picture and sound transmission via a connecting cable, e.g. from DVD screen as an output device.
Operating additional equipment Sound from PC or Set Top Box Component Video connection Feed the analog audio signal from the PC or the STB to the sockets AUDIO IN L/R on the TV via a cinch cable. The sound is reproduced by the TV speak- If you have a DVD player/recorder with Component OUT connections, you ers.
In DVD mode the following DVD players can be operated: Xemix 6122DO, 8122DA und 6222PS. You can switch over the remote control of the TV set to operate Loewe In VCR mode the following VCRs can be operated: ViewVision 8106H, video recorders and Loewe DVD players.
Wait until the timer recording has ended or delete the TV menu (grayed out) the timer. The control of the Loewe video recorder and the a) The Digital Link function is not activated or not a) Activate Digital Link in the video recorder (see timer do not work or do not work properly.
Page 31
What to do, if ... Problem Possible cause Help Digital Link Plus does not function a) Euro AV cable is not fully wired a) Replace the Euro AV cable (pin 10 not wired) b) Some video recorders can only take over the b) Restore the video recorder to the as-delivered stations in fi...
Audio IN General 2 x Cinch Audio OUT (level adjustable in active loudspeakers) Cinch COMPONENT IN: Cb/Pb signal Xelos A 32 DVB-T (digital) Item No. 64466.A88 Cinch COMPONENT IN: Cr/Pr signal Xelos A 37 DVB-T (digital) Item No. 64467.A88 Cinch...
Loewe Audio systems and active speaker systems In connection with a Loewe TV with a Loewe audio system and a Loewe speaker system you have an excellently tuned Home Cinema system. Advan- tages are high operating comfort, attractive design and adapted technology...