Configure Picture In Picture (Pip) Mode - Loewe Xelos 32 LED Operating Instructions Manual

Picture in Picture

Configure Picture in Picture (PIP) mode

You can set different parameters for the picture in picture mode in the
PIP menu.
Open the PIP menu
➠ PIP mode started,
if not, press PIP button.
➠ In Standard PIP functionality:
The frame is green,
if not, press the green button.
MENU: Call PIP menu.
POSITION
Here, you can determine the position of the small picture, top left, bottom left,
top right or bottom right. Without a screen display you can also do this with the
"up", "down", "left" and "right" buttons.
TV MENU
Settings
PIP
Position
upper right
Explanations of the setting options in the PIP menu:
➠ Note restrictions for the PIP mode (see page 43).
Position You can determine the position of the small picture here
(upper left, bottom left, bottom right, upper right).
Without a screen display the position can also be changed
with the menu control buttons (see below).
Change position of Small PIP
➠ Other than the status line, which may possibly be
displayed, no other display is shown on the screen:
Move the PIP into a corner of the screen.
The position of the small picture can also be selected
under Position in the PIP menu (see above).
- 44
...