Timer recording with video or DVD recorder Changing stations Assignment of digital audio inputs and outputs Basics about the menu operation Connect Loewe DVD Preceiver Auro 2216 PS For the info system Connecting other audio amplifiers or active speakers For the index...
Remote control - TV functions Sound off/on Switch on/off - on standby Switch over to operate VCR Switch over to operate DVD player Switch over to opertae TV set Picture menu on/off Call timer list Sound menu on/off Standard parameters for picture/sound DISC-MENU Radio on/off /menu “Other functions”...
Control units Xelos A 26 and Xelos A 42 Call the menu, Display: in the menu: up red = standby green = operation orange = operation without screen display (radio mode, EPG data capture or timer recording) Station up, Station down,...
Page 5
Control units Xelos A 32 and Xelos A 37 Display: red: standby green: operation Common Interface green and red: timer recording, Headphones connection EPG data capture S-VHS connection (AVS) or radio mode (i.e. for camcorders) Video input (AVS) Audio input right Audio input left Call the menu, in the menu: up/down...
Connections to rear panel – Xelos A 26 Common interface Headphone connection S-VHS connection (AVS) (i.e. for camcorders) Video input (AVS) Audio input right Audio input left Mains switch Antenna/cable/analogue/digital Center audio input (analogue) Audio input left/right (analogue) Audio output left/right (analogue) Socket for power cable Service socket...
Page 7
Connections to rear panel – Xelos A 32/37 Mains switch Center Audio input (analogue) Antenna/cable PIP tuner Audio input left/right (analogue) or satellite antenna Satellite antenna (Sat tuner 1) (Sat tuner 2) Audio output left/right (analogue) Component Antenna/cable Euro-AV- Euro-AV- Socket for power video inputs analogue/digital...
Page 8
Connections to rear panel – Xelos A 42 Common Audio input left interface Audio input right Video input (AVS) S-VHS input (AVS) (i.e. for camcorders) Headphone connection AUDIO IN AUDIO OUT 89352.001 ANT-SAT Mains switch 13/18 V /350 mA SERVICE...
Use the wall holder WM53 for Xelos A 32/37, Loewe order no. 63493A10. your TV. If you want to operate the TV, you can access functions directly Use the wall holder WM61 for Xelos A 42, Loewe order no. 64495L00. from the index. This saves you from having to read through detailed...
Welcome Note on the plasma screen (Xelos A 42) Disposal The TV set with plasma screen you have purchased meets the highest Packing and box quality requirements and has been tested for pixel errors. Despite the You have chosen a long lasting technical product of very high quality. We...
• Place the TV set on a level, firm base. The set should not protrude at the (e.g. workshops). If the front when installing in cabinets or shelves. equipment is used in the Only use original accessories if possible, e.g. Loewe wall holders and open air, ensure that it is stands. protected against moisture Never let children handle the TV unattended.
Setting up the remote control for operating the TV Push the TV button. How to operate other Loewe equipment is described on page 39. 220-240V~ 50/60Hz? ANT-TV ANT-SAT Xelos...
First installation If the reception conditions are good, then a room antenna may be used Using the common interface module for DVB-T. Passive and active room antennas are available on the market. (only for sets with CI slot) The power is supplied for an active antenna via the antenna connection. In order to be able to receive encrypted digital stations, the common For automatic programming or in “TV Menu –...
First installation Automatic programming 9. You should receive a picture with sound with the settings previously made (only for ASTRA 1 and HOTBIRD). Then press OK. Automatic programming of the TV set is started the first time you switch it 10.
First installation Daily operation Directing DVB-T antenna Switch on/off Note: not with DVB-T stations in UK. Your TV is equipped with an eco-standby power supply unit. On standby, If you use a room antenna to receive one or more DVB-T stations that have the power consumption drops to low power.
Daily operation Changing stations ... via the station list Use OK to call the station list ... with the P+/P- buttons on the remote control Station list Numerical COMP. IN 6 3SAT HDMI/DVI 7 S–RTL Stations up/down 8 N–TV V– 9 DSF 10 TM3 11 PRO7...
Daily operation Basics about the menu operation TV menu INFO Sound Bass Menus are called via the MENU button or via the button for special menus and can be hidden by using these buttons or by using the END button. Set the bass tones by using The menu is displayed in the bottom section of the screen.
Daily operation For the info system ... to select the line below, for example “Search wizard“. For each menu point, an info text is displayed at the top of the picture to Search wizard help you with the setting. This saves you from having to refer back to the Use this menu to search for stations automatically once certain settings operating instructions.
Daily operation For the index ... For example, you want to have the TV set switch off automatically: Select the index item “Switch off“ – “Automatic“. Using the index, you can access many operational functions directly. You can also find a great deal of information on technical terms about You can set your TV set to switch off to stand-by mode once or every day at a given time.
Daily operation Setting the sound Setting the picture Volume and other frequently used sound settings Open the Picture menu INFO Picture Setting the volume Picture adjustment more ... Contrast Colour Sharpness normal Volume P– to select the picture function to be set and use by using or OK, you can call other sound settings ...
Modes of operation – TV For the status display, the DVB station providers may offer additional selection options for each station. Thus, the corresponding colour key or In initial installation and daily operation, the TV set is in TV mode. This is the TEXT button is displayed: also the case when none of the other modes of operation, such as EPG, Teletext, PIP or Radio, have been selected.
Modes of operation – TV Standard settings picture and sound (for DVB-T stations in UK: call menu For a recorder that is logged in, you can find the following menus in the “Additional functions”) “Recording wizard“: Recording wizard - to programme new timer recordings Call personal settings/factory settings for picture and •...
Modes of operation – TV Timer functions DVB subtitles You can have your TV switch off at pre-programmed times or wake If the station provides DVB subtitles, then you can have the TV display them you/remind you with radio or TV. If you are not present at the time, a safety permanently or suppress their display.
Modes of operation – TV Removing the CI module Confirm using OK, so that the new software can be loaded and installed via 1. Switch the TV set off by pulling the mains plug satellite. Continue as set out in the “Downloading the software“ section. from the power outlet.
Modes of operation – PIP Picture in picture (PIP) Select the station of the TV picture (main picture) The bar/frame has to be white. If not, press the green Note: The coloured keys do not work as described below with DVB-T colour key.
Modes of operation – PIP Functions in the PIP menu Position of the PIP picture In the PIP menu, you can set the PIP type (small PIP or split screen) and the Move the PIP picture with the arrow keys to a corner position of the small picture.
Modes of operation – EPG EPG - Programme guide When receiving digital terrestrial and digital satellite stations, you may find that two identical EPG data are displayed in the “EPG (DVB)“ menu for Note: The EPG does not work with DVB-T stations in UK. The “Now& Next” one station.
Modes of operation – EPG ✓ In front of the programme‘s title, the system places an . This station is Now all stations are displayed (the DVB stations, too). Stations indicated with E are analogue terrestrial/cable stations; stations indicated with D are switched to later when the set is switched on.
Modes of operation – Teletext Analogue Teletext In Multiple pages scroll using . You can see which multiples pages can be called in the bottom menu line. Teletext transmits information such as news, weather, sports, programme previews and subtitles. Zeitplan Fußball 1 2 3 4 5 6 7 8 9 10 11 12 Teletext on/off...
Modes of operation – Teletext Programme timer recordings Digital teletext operation (only UK) A video or DVD recorder must be connected and logged in in the In the UK, the teletext for DVB-T stations (TV and Radio) is transmitted as connection wizard.
Modes of operation – Radio Radio EPG - Programme guide Note: not with DVB-T stations in UK. You can only receive radio stations via DVB. If you do not have any DVB radio reception, you can play a sound signal from an external device using For the DVB radio stations, you can also use the programme guide if the the TV set via the sound/AV inputs.
Operating additional equipment Login and connect equipment Search for and store the station of the video recorder (if no Euro-AV cable is available) You have logged in and connected all connected equipment in the Switch on the test station on the VCR or insert a recorded tape and start initial start-up.
Calling AV input via the station list If you have a Loewe recorder with both systems, you can use all the Call the station list with the OK button in TV mode. advantages. The advantages of Digital Link Plus are used for the timer In the numeric and alphabetical sorting, you will always find the AV sockets recording;...
OUT L/R) with a cinch cable and switch the audio amplifi er to ana- AUDIO DIGITAL logue audio input. The digital TV sound or the digital sound of a connected auxiliary de- vice is only audible via an external digital audio amplifi er (e.g. Loewe Auro system). Surround Amplifier MULTICHANNEL AUDIO OUT...
Sound menu, select “Sound via“ and then “TV“. If you want to listen to the socket on the subwoofer. Use the cubic plug cable enclosed with the DVD sound via the Loewe Auro system, select “AURO“ under “Sound via“. Preceiver. Plug the white plug (without kink protection) into the cubic socket on the subwoofer.
Operating additional equipment Connecting other audio amplifiers or active Select “Analogue“ for “Sound transmission“ for analogue audio amplifiers. The sound for the analogue amplifier is transmitted via the AUDIO OUT L/R speakers connections of the TV to the audio amplifier. Connect the amplifier with two cinch cables.
TV screen as an output device. cable, e.g. from Loewe DVD Recorder Centros 2102/2172 HD. Connect the PC/STB to the VGA/XGA socket on the TV using The digital picture and sound data are transmitted without a VGA cable.
Operating additional equipment Sound from PC or Set Top Box Component video connection Feed the analogue audio signal from the PC or the STB to the sockets If you have a DVD player/recorder with Component OUT AUDIO IN L/R on the TV via a cinch cable. The sound is reproduced via the connections, you can connect it to the SD/HD-COMPONENT TV speakers.
Loewe DVD players directly operated: Xemix 6122DO, 8122DA and 6222PS. You can switch over the remote control of the TV set to operate Loewe In VCR mode, the following VCRs can be operated: ViewVision 8106H, video recorders and Loewe DVD players. These devices can be operated 8136H, 8176H, 6306H, 6336H, 6376H, 6396H, 4306H, 4376H, 2102M, directly.
Wait until the timer recording has ended or delete (deactivated). the timer. The control of the Loewe video recorder and a) The Digital Link function is not activated or not a) Activate Digital Link in the recorder (see the timer do not work or do not work properly.
Page 41
What to do, if ... Problem Possible cause Help Digital Link Plus does not function. a) Euro-AV cable is not fully wired (pin 10 not a) Replace the Euro-AV cable. wired). b) Some recorders can only adopt stations during b) Restore the recorder to the as-delivered state the initial installation of the TV set.
Technical data General data Type Xelos A 26 Xelos A 32 Xelos A 37 Xelos A 42 Item no., Version DVB-T/C – 65466x89 65467x89 – Version DVB-T/C CI 65465x87 – – 65419 x87 Version DVB-T/C CI DR+ T/C – 65466x47...
Technical data Electrical data Connections Jack 3.5mm Headphones 32- 2000 ohm Chassis name L 2650 Mini-DIN (AVS) Video IN Y/C (S-VHS/Hi 8) Power supply 220 V -240V/50- 60 Hz Cinch (yellow) Video IN CVBS (VHS/8 mm) Tuner VHF/UHF/ cable Cinch (white/red) Audio IN Hyperband 8 MHz 41 MHz to 860 MHz IEC socket 75 Ohm/5 V/80 mA...
Loewe audio system Auro and the active speaker system Tremo You can retrofit either this digital satellite tuner or a PIP tuner. The interplay of a Loewe TV with a Loewe audio system and a Loewe Retrofitting not possible for TV sets in the UK.