Loewe Xelos 32 LED Operating Instructions Manual page 69

Digital Recorder
Setting the pre-record and post-record time
You can set a pre-record and post-record time for timer recordings made
without auto time control (DVB) (see also page 87). This minimizes
the risk that a part of the broadcast is not recorded due to the broadcast
starting earlier and/or finishing later.
MENU: Call TV menu.
Choose Recording,
switch to the menu line below.
PRE-RECORD TIME
If you record a programme without VPS, you can enter a time span here
specifying how long before the scheduled time your programmed recording
should start so that programmes which begin too early are recorded
in full.
TV MENU
Recording
list Pre-record time
00 min (0 - 15)
Set pre-record or post-record time,
switch to the menu line below.
Enter the time using the numeric buttons (always 2-digit:
01 to 15 mins for pre-record time; 01 to 60 mins for
post-record time). Factory setting: pre-record: 00 min,
post-record: 05 min.
Post-record time Recording wizard
69 -