Software Update; Basic Information; Usb Stick; Download - Loewe Xelos 32 LED Operating Instructions Manual

Software update

Basic information

It is possible to update the software on your TV set. Current software
versions can be downloaded from the Loewe Internet site and installed
on your set using a USB stick.

USB stick

Requirements of USB stick
USB sticks tested by Loewe and compatible in type and format can be
ordered from the Loewe dealer using the article no. 90456.900.
If you would like to use your own USB stick, please follow these tips/
conditions:
• Formatting in FAT32.
• Only 1 partition.
• Do not use encrypted USB sticks.
• Do not use USB sticks which simulate a CD ROM drive.
• There may be no hidden files on the device.
• For some types of device, the construction of the USB stick is significant.
Maximum dimensions in mm: 70x20x10.
• If in doubt, the USB stick should be formatted as "FAT32" without
"extended attributes".

Download

Software download from the Loewe Internet site
You can download new software for your TV set from our homepage.
To do this register on our homepage
http://support.loewe.tv (International),
http://support.loewe.tv/uk (United Kingdom and Republic of Ireland),
http://support.loewe.tv/au (Australia) or
http://support.loewe.tv/nz (New Zealand)
(under Register now).
Simply follow the steps in the registration process.
After the successful registration process and subsequent login to the
homepage you have to register your set (have the article number and
serial number ready – both are mentioned on the sticker on the rear
side of the set or under Integrated features in the index of the TV set,
see page 15).
Then you will get a list of downloadable contents for your TV set including
the software for your TV set. Download the data and unpack all the files
in this ZIP archive into the main directory of your USB stick.
Then carry out the software update as described below.
.
Software update
In the software update (package update) all the software releases in the
TV are scanned and updated as required.
To do this, insert the USB stick with the downloaded software into a free
USB port on the TV set (see connections page 11).
Calling Software update
MENU: Call TV menu.
Select Settings,
go to the menu line below.
Select Miscellaneous,
go to the menu line below.
Select Software update,
OK Call Software update Wizard.
The versions of the current software package are
displayed.
SOFTWARE UPDATE WIZARD
Current software package:
TV base software
DVB software
DVB bootloader
WiFi software
FRC software
MSP software
MPEG encoder software
Standby processor software
You can now search for new software. Please select the software type and start
the search with the
Proceed
OK
OK Proceed.
The TV set searches for a new software package on
the USB stick.
If a new software version is available after the search, the
following on-screen message appears (see page 104).
If several different software packages are found on the
USB stick, the latest software package is always used.
If no new software package was found in the search:
OK Exit wizard.
V1.6.0.0
V10.5.0.40
V10.6.0.165
V1.0.0.0
V0.0.11.0
V10.4.21.0
V8.103.0.0
V8.22.102.0
V1.1.100.0
button.
OK
continued on the next page
103 -