Loewe Xelos 32 LED Operating Instructions Manual page 34

Daily operation
Selecting the picture format
Press the Picture format button until the desired picture
format is set or press
Picture format
4:3 Panorama
to select the desired picture format.
The Panorama picture format can be set between
proportionally correct and format filling display. Black
bars are visible on the left and right of the picture in
the proportionally correct display.
Switch: Keep the M button on the TV pressed, at the
same time, press the Picture format button on the remote
control briefly.
Reset: Press the same button combination again.
Explanations of the picture formats:
➠ The setting options depend on the transmitted picture
content.
16:9 Proportionally correct display of 16:9 broadcasts.
4:3 Proportionally correct display of 4:3 broadcasts.
Panorama Proportionally correct or format filling display (as-delivered
state) of 4:3 broadcasts on the 16:9 screen. Station logo
and subtitles remain visible.
See above for switching the Panorama mode.
Zoom Proportionally correct display. Maximum picture magni-
fication.
PALplus Is a 4:3-compatible 16:9 picture broadcast supplied by
the station which is detected automatically.
If a high resolution video signal is displayed on the TV set
or fed in via the interfaces PC IN, HDMI1 or HDMI2, the
picture formats 16:9 PC, 16:9 TV, 16:9 Zoom, 4:3 PC, 4:3
TV and 4:3 Zoom can be set.
In the PC formats, the complete picture content will be
shown. In the TV formats a small part of the picture is
cropped. This may be necessary to hide possible interfer-
ence at the edge of the picture, which arises from the
signal supplied.
(1 Depending on the settings selected.
- 34
Zoom 16:9
Move picture vertically
➠ In normal TV mode without other displays.
Move picture up/down.
Bild vert. verschieben Move picture up/down
2
To show subtitles or news tickers which have been cut
off, the picture can be moved up or down in the picture
formats Panorama, Cinema and Zoom (not with high
resolution signal) with the arrow buttons
Presettings / Personal settings for picture adjustment
MENU: Call TV menu.
Select Picture,
go to the menu line below.
Select Picture adjustment,
go to the menu line below.
TV MENU
Picture
Picture adjustment
Presettings (TV digital)
Eco standard
Select Presettings or Personal settings.
For presettings, go to the menu line below.
Select the desired presetting for the picture.
OK Confirm selection.
Explanations for Picture adjustment:
If you select Presettings, the picture settings for the signal input group
currently active are set to predefined values. See Glossary for an explana-
tion: Signal input groups.
Your own settings for contrast, colour intensity, colour temperature,
brightness, sharpness and digital noise suppression are saved in the
personal values. At the same time, you have your own personal values
for each signal input group.
All picture and sound adjustments can be reset to the default values in
one step for all signal input groups in the index of the TV set under Reset
picture/sound or Factory settings picture/sound.
.
Personal settings (TV digital)
...