Loewe Xelos 32 LED Operating Instructions Manual page 40

Managing stations
Search for/update stations – handling of new and no longer found stations
The number of new stations found is displayed after the automatic search/
update has been completed.
OK List of new stations found
SEARCH WIZARD
All stati
Note: The newly found stations which you have already deleted
SEARCH FOR/UPDATE STATION
Newly found stations
Proceed
OK
P+
P–
Select station.
Yellow button: Mark / unmark station
Blue button:
OK saves the selected stations.
Afterwards, a list of the stations which are saved but
which are temporarily not broadcasting or no longer exist
is displayed, if available.
The number of the memory location used is displayed in
front of the station. Please select the stations you really
want to delete.
SEARCH WIZARD
The following stored stations were no longer found because they are not
currently broadcasting a programme or no longer exist. Please mark those
you want to delete completely. Those not marked are retained.
SEARCH FOR/UPDATE STATION
Stations no longer found
Proceed
OK
P+
P–
Select station.
Yellow button: Mark / unmark station
Blue button:
OK deletes the selected station.
END: Exit the search wizard.
- 40
OK
Mark/unmark station
Mark/unmark all
Mark / unmark all
OK
Mark/unmark station
Mark/unmark all
Mark / unmark all
Search/update station – manual search / settings
➠ If you want to adapt the parameters of an existing station, first select
the appropriate station.
MENU: Call TV menu.
Select Settings,
go to the menu line below.
Select Stations,
go to the menu line below.
Select Manual adjustment,
OK call input box.
You can enter or edit the station data in the following
lines:
MANUAL ADJUSTMENT
Signal source
Channel
Frequency
Name
TV standard
Col. standard
Or:
Blue button: Starts Search and searches for next station.
Red button: Stores station.
➠ Only stations for the selected signal source can be
saved which do not yet exist in the station list.
➠ Stations which already exist in the station list for the
selected signal source are displayed with their station
numbers and names on a grey background. These
stations can only be overwritten with the red button.
Explanations of some search settings:
Various settings are possible depending on the selected signal source.
Some settings have already been explained in the initial installation (see
page 21 onwards).
Signal source Selection of range in which you want to search for the
station.
Channel Direct input of channel.
Frequency Direct input of station frequency.
TV stand. Input of station TV standard.
Ask your dealer in this regard.
Col. standard Input of the station colour standard.
Ask your dealer in this regard.
Cable (analogue) DVB-T
S21
303.25 MHz
KiKa
B/G
Automatic
Store
Search
DVB-C