Set Up The Clients; Figure 24 Wan > Internet Access Setup - ZyXEL Communications P-793H User Manual

Configure the Internet Access Setup screen as the following. Select ATM as the
3
Transfer Mode. Select Bridge as the Mode. Configure the Multiplexing,
Encapsulation, VPI, and VCI fields for the point-to-point connection. Select 1
in the Line field as the DSL line you want the P-793H v2 to use as a default for
outgoing traffic.
Then configure the Service Type section. Select 2 wire-2 line in the Service
4
Mode field. In the Service Type field, select Server. For Line1 configuration,
select 5696 as the Transfer Max Rate and 3200 as the Transfer Min Rate. For
Line2 configuration, select 2560 as the Transfer Max Rate and 1280 as the
Transfer Min Rate. Leave the rest of the fields to their default settings. Click
Apply.
Figure 24 WAN > Internet Access Setup

5.3.2 Set up the Clients

Log in to the client P-793H v2 of branch office B.
1
Click Network > WAN > Internet Access Setup.
2
P-793H v2 User's Guide
Chapter 5 Tutorials
71