Syslog Logging; Figure 202 Menu 24.3.2: System Maintenance - Unix Syslog; Table 135 Menu 24.3.2: System Maintenance - Unix Syslog - ZyXEL Communications P-793H User Manual

34.4.2 Syslog Logging

The P-793H v2 uses the syslog facility to log the CDR (Call Detail Record) and
system messages to a syslog server. Syslog and accounting can be configured in
Menu 24.3.2 - System Maintenance - Syslog Logging, as shown next.

Figure 202 Menu 24.3.2: System Maintenance - UNIX Syslog

You need to configure the syslog parameters described in the following table to
activate syslog then choose what you want to log.

Table 135 Menu 24.3.2: System Maintenance - UNIX Syslog

FIELD
UNIX Syslog:
Active
Syslog IP
Address
Log Facility
When finished configuring this screen, press [ENTER] to confirm or [ESC] to cancel.
Your P-793H v2 sends five types of syslog messages. Some examples (not all P-
793H v2 specific) of these syslog messages with their message formats are shown
next:
P-793H v2 User's Guide
Menu 24.3.2 - System Maintenance - UNIX Syslog
UNIX Syslog:
Active= No
Syslog IP Address= 0.0.0.0
Log Facility= Local 1
DESCRIPTION
Press [SPACE BAR] and then [ENTER] to turn syslog on or off.
Enter the server name or IP address of the syslog server that will log
the selected categories of logs.
Press [SPACE BAR] and then [ENTER] to select a location. The log
facility allows you to log the messages to different files in the syslog
server. Refer to the documentation of your syslog program for more
details.
Chapter 34 System Information & Diagnosis
381