Q/1P Example - ZyXEL Communications P-793H User Manual

14.1.3 802.1Q/1P Example

This example shows how to configure the 802.1Q/1P settings on the P-793H v2.
802.1Q/1P Example
LAN1 and LAN2 are connected to ATAs (Analogue Telephone Adapters) and used
for VoIP traffic. You want to create high priority for this type of traffic, so you want
to group these ports into one VLAN (VLAN2) and then to a PVC (PVC1) where the
priority is set to high level of service.
You would start with the following steps.
Click Advanced > 802.1Q/1P > Group Setting, and then click the Edit button
1
to display the following screen.
In the Name field type VoIP to identify the group.
2
In the VLAN ID field type in 2 to identify the VLAN group.
3
Select PVC1 from the Default Gateway drop-down list box.
4
In the Control field, select Fixed for LAN1, LAN2 and PVC1 to be permanent
5
members of the VLAN group.
P-793H v2 User's Guide
P-793H v2
1
1
2
2
3
4
3
5
6
4
7
8
Chapter 14 802.1Q/1P
VoIP Network
Internet - (PPPoE)
209