C
H A P T E R
Use this menu to configure detailed remote node settings (for example, your ISP
is a remote node) as well as apply filters.
28.1 Introduction to Remote Node Setup
A remote node is required for placing calls to a remote gateway. A remote node
represents both the remote gateway and the network behind it across a WAN
connection. Note that when you use menu 4 to set up Internet access, you are
actually configuring a remote node.
28.2 Remote Node Setup
From the main menu, select menu option 11 to open Menu 11 - Remote Node
Setup (shown below).
Figure 149 Menu 11: Remote Node Setup
Type the node number you want to configure and press [ENTER].
P-793H v2 User's Guide
Remote Node Setup
Menu 11 - Remote Node Setup
1. MyISP (ISP, SUA)
2. ________
3. ________
4. ________
5. ________
6. ________
7. ________
8. ChangeMe (BACKUP_ISP, SUA)
Enter Node # to Edit:
28
325