C
H A P T E R
This chapter leads you through SMT menus 24.8 to 24.11.
36.1 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main router firmware. The CI
provides much of the same functionality as the SMT, while adding some low-level
setup and diagnostic functions. Enter the CI from the SMT by selecting menu 24.8.
Access can be by Telnet or by a connection to the console port, although some
commands are only available with a console connection. See the included disk or
zyxel.com for more detailed information on CI commands. Enter 8 from Menu 24
- System Maintenance.
Use of undocumented commands or misconfiguration can
damage the unit and possibly render it unusable.
Figure 223 Command Mode in Menu 24
36.1.1 Command Syntax
The command keywords are in courier new font.
Enter the command keywords exactly as shown, do not abbreviate.
P-793H v2 User's Guide
Menus 24.8 to 24.11
Menu 24 - System Maintenance
1.
System Status
2.
System Information and Console Port Speed
3.
Log and Trace
4.
Diagnostic
5.
Backup Configuration
6.
Restore Configuration
7.
Upload Firmware
8.
Command Interpreter Mode
9.
Call Control
10. Time and Date Setting
11. Remote Management
36
403