Good Habits For Managing The P-793H V2; Leds; Figure 4 Leds; Table 1 Leds - ZyXEL Communications P-793H User Manual

Chapter 1 Getting To Know Your P-793H v2

1.3 Good Habits for Managing the P-793H v2

Do the following things regularly to make the P-793H v2 more secure and to
manage the P-793H v2 more effectively.
• Change the password. Use a password that's not easy to guess and that consists
of different types of characters, such as numbers and letters.
• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it).
Restoring an earlier working configuration may be useful if the device becomes
unstable or even crashes. If you forget your password, you will have to reset the
P-793H v2 to its factory default settings. If you backed up an earlier
configuration file, you would not have to totally re-configure the P-793H v2. You
could simply restore your last configuration.

1.4 LEDs

The following figure shows the LEDs.

Figure 4 LEDs

The following table describes the LEDs.

Table 1 LEDs

LED
POWER
LAN 1~4
40
COLOR STATUS DESCRIPTION
Green On The P-793H v2 is receiving power and functioning
properly.
Blinking The P-793H v2 is rebooting or performing
diagnostics.
Red On Power to the P-793H v2 is too low.
Off The system is not ready or has malfunctioned.
Green On This port has a successful Ethernet connection.
Blinking This port is sending/receiving data.
Off This port is not connected.
P-793H v2 User's Guide