Panasonic VB-9411ADSUK Operation Instructions Manual page 90

CONNECTION OF OPTIONAL UNITS
Changing non-dialed call transfer
If the outside caller has a pulse dialling phone or waits too long, calls will reroute to an operator
automatically. If you wish to reroute to an extension other than operator, you can change it.
(1) Store/change reroute extension number
q Call DISA OGM unit.
w After DISA answered, dial
e Dial the appropriate extension number (10 to 25).
r Dial
to finish.
• If # # is stored instead of extension number, dialing abbreviaion number "0" disconnects the
DISA line.
• If storing is completed, you will hear one beep confirmation tone.
• If storing is failed, you will hear error tone (two beep sounds).
• To clear or return to the initial data (operator call).
Skip the dialing extension number (step e above).
Dial 9 for operator call
If the system is programmed dial 9 as operator call, please set non-dial call transfer on
instead of 9 9 0 .
Replacement of Backup Lithium Battery
WARNING
Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufucturer. Dispose of used
batteries according to the manufacturer's instructions.
9 9 0 .
I-30
9 9 9