Mode 8 (Communication Parameter Setting - Panasonic VB-9411ADSUK Operation Instructions Manual

PROGRAMMING (MODE 8)

MODE 8 (Communication Parameter Setting)

For Call Logging/on site program-
ming/remote programming.
0001#-(0 or 1)#
OUTPUT MODE
Data of outgoing/incoming calls can be output to Call
Logger (or printer).
To set to output only outgoing data or both outgoing and
incoming data:
0#: Outgoing data only
1#: Outgoing and incoming data
0002#-(0 or 1)#
TITLE PRINTING
Titles can be output to printer.
To set to output titles or not:
0#: No output
1#: Titles every 60 data
0003#-(0 or 1)#
OUTPUT DIAL
Data of all dial calls can be output to printer. Only the
data of specified dial calls can be also output to printer.
To set to output all dial calls or only the specified dial
call:
0#: All dial calls
1#: Specified dial calls only
REFERENCE : See MODE 8 01(01-16)#.
0004#-(0 or 1)#
PBX INTERCOM CALL
Data of PBX intercom call can be output to printer.
To set to output the data or not:
0#: Does not output data
1#: Outputs data
0005#-(0 or 1)#
PRINTER OUTPUT WHEN EXCHANGE
LINE CALL ON HOLD ANSWERED
The data including hold time when answering the
Exchange line call on hold can be output to printer.
When set to "no output", the total time from when the
line is first acquired to the end of the final call is output.
When set to "output", the time is output at each hold re-
response.
To set to output the data or not:
0#: Does not output data
1#: Outputs data
0006#-(0 or 1)#
PRINTER OUTPUT WHEN ACCOUNT
CODE ENTERED
The data of calls made by entering the account code can
be output to printer, immediatery or later the data being
put together by account code.
To set to output the data or not:
0#: Output later (At finish a call)
1#: Output immediately
01nn#(0-9999)#
PRINTER OUTPUT OF SPECIFIED INITI-
ATING DIAL NUMBER
Only the data of calls made by specified dial can be
output to printer. This function is valid only when
"Specified dial calls only" has been set in the MODE 8
0003#.
16 types with up to 4 digits can be set.
To set the initiating dial number:
(0-9999)#: Dial number
None
Clear : Press FF5 Key
NOTE : " " or " # " can not be set.
P-56
(nn=01-16: Out Dial No.)