Panasonic VB-9411ADSUK Operation Instructions Manual page 152

PROGRAMMING (MODE 8)
0210#-(33-254)#
SPECIAL CHARACTER "Å" CONVER-
SION CODE
See 0201# "SPECIAL CHARACTER "Ä" CONVER-
SION CODE" for detailed information.
(33-254)#: Setting character code
143# : Character "Å" code for IBM computer
1001#-(0 or 1)#
BAUD RATE for CALL LOGGING or
PROGRAMMING DATA TERMINAL
0#: 4800 bps
1#: 1200 bps
1002#-(0 or 1)#
STOP BIT LENGTH for CALL LOGGING
or PROGRAMMING DATA TERMINAL
0#: 1 bit
1#: 2 bits
1003#-(0 or 1)#
DATA LENGTH for CALL LOGGING or
PROGRAMMING DATA TERMINAL
0#: 7 bits
1#: 8 bits
1004#-(0 or 1)#
PARITY CHECK for CALL LOGGING or
PROGRAMMING DATA TERMINAL
0#: No parity check
1#: Odd number parity
2#: Even number parity
1102#-(0 or 1)#
STOP BIT for REMOTE PROGRAM-
MING
Can set signal specifications for DISA modem serial
signals during remote programming.
0#: 1 bit
1#: 2 bits
NOTE : The remote transmission speed is fixed at 300 bps.
1103#-(0 or 1)#
DATA LENGTH for REMOTE PRO-
GRAMMING
Can set signal specifications for DISA modem serial
signals during remote programming.
0#: 7 bits
1#: 8 bits
1104#-(0 or 1)#
PARITY for REMOTE PROGRAMMING
Can set signal specifications for DISA modem serial
signals during remote programming.
0#: No parity check
1#: Odd number parity
2#: Even number parity
P-58