Panasonic VB-9411ADSUK Operation Instructions Manual page 122

PROGRAMMING (MODE 1)
0303#-(0, 1 or 2)#
TIMED BREAK TIME
You can send a recall signal by pressing FL/R key
during Exchange line call.
However, time break must be set in "FL/R KEY TYPE"
setting of "MODE 2 Trunk Setting", address (01-
04)16#-(0 or 1)#.
To set the timed break time:
0#: 80 mseconds
1#: 110 mseconds
0304#-(0, 1-4)#
MANUAL FLASH TIME
You can set the telephone so that it seizes the line and
makes an Exchange line call after temporarily releasing
the Exchange line by pressing FL/R key during Ex-
change line call.
Flash must be set in "FL/R KEY TYPE" setting of
"MODE 2 TRUNK Setting", addresses (01-04)16#-(0
or 1)#.
To set the manual flash time:
0#: 0.5 second
1#: 1 second
2#: 1.5 seconds
0308#-(0, 1-4)#
CALL FORWARD NO ANSWER DE-
LAYED TRANSFER TIME
When the telephone is set to the Call Forward No
Answer function, you can set how long the telephone
should ring before the call is transferred elsewhere.
0#: 4 seconds
1#: 8 seconds
2#: 16 seconds
0309#-(1-7)#
EXTENSION HOLD RECALL TIMER
A recall warning tone sounds to indicate that an Ex-
change line call has not been answered within a speci-
fied time after being put on HOLD.
1#: Recall after 20 seconds
2#: Recall after 40 seconds
3#: Recall after 60 seconds
4#: Recall after 90 seconds
5#: Recall after 120 seconds
6#: Recall after 150 seconds
7#: Recall after 180 seconds
2#: 275 mseconds
3#: 2 seconds
4#: 3 seconds
3#: 24 seconds
4#: 32 seconds
P-28
0310#-(1-7)#
OPERATOR HOLD RECALL TIMER
This is a timer of Hold Recall of an operator. The timer
is activated only when an operator phone holds the call.
This setting means how long a call is to be placed on
hold before hold Recall is activated to an operator.
1#: Recall after 20 seconds
2#: Recall after 40 seconds
3#: Recall after 60 seconds
4#: Recall after 90 seconds
5#: Recall after 120 seconds
6#: Recall after 150 seconds
7#: Recall after 180 seconds
0311#-(1-7)#
EXTENSION TRANSFER RECALL
TIMER
If an Exchange line call is not answered within a
specified time after being transferred, the call will revert
back to the original extension.
1#: Recall after 20 seconds
2#: Recall after 40 seconds
3#: Recall after 60 seconds
4#: Recall after 90 seconds
5#: Recall after 120 seconds
6#: Recall after 150 seconds
7#: Recall after 180 seconds
0312#-(1-7)#
OPERATOR TRANSFER RECALL
TIMER
This is a timer of Transfer Recall of an operator. The
timer activates only when an operator phone transfers
the call. This setting means how long the transferred
call should ring before the Transfer Recall is activated
to an operator.
1#: Recall after 20 seconds
2#: Recall after 40 seconds
3#: Recall after 60 seconds
4#: Recall after 90 seconds
5#: Recall after 120 seconds
6#: Recall after 150 seconds
7#: Recall after 180 seconds