Making An Exchange Line Call; Making A Call; Using The Line Key - Panasonic VB-9411ADSUK Operation Instructions Manual

Making an Exchange Line Call

Making a Call

Using the LINE Key .........................................................................

You can make an exchange line call by pressing the LINE key and dialing a telephone number. You need
not dial a group number.
1 2
1 2 3
LINE 4 5 6
7 8 9
0
Telephone
Number
Pulse to DTMF Signal Conversion
You can send DTMF signals by pressing
computers.
By programming, the system automatically sends DTMF signals after dialing a telephone number.
Long Speech Alarm
The alarm beeps after you have been speaking for 2 min. and 30 sec. Afterwards, it beeps every 3 min.
This feature requires programming and only available for key telephones.
Account Code
This system can record a separate account code for each client. Each account code can be up to 10 digits long. If you
want to enter an account code and make a call, do the following:
( Account
1 2 3
8 7
4 5 6
7 8 9
code
0
If you want to enter an account code during the conversation, do the following:
( Account )
1 2 3
MEMORY 4 5 6
7 8 9
0 code
Trunk Queuing
When all exchange lines are busy, use this feature to tell you when a line becomes free.
( )
6
LINE Busy Tone
When your telephone rings, pick up the handset within 16 sec. You are immediately connected to a vacant line.
3 4
or # after dialing a telephone number. This feature is useful for calling bank
( Telephone
)
1 2 3
LINE 4 5 6
7 8 9
No.
0
O-11
Making an Exchange Line Call
)