Removing Continuous Forms; Setting The Paper Thickness Lever - Oki ML6300FB-SC User Manual

R
EMOVING CONTINUOUS FORMS
1. Tear off the continuous forms.
2. Press the SEL button to set the printer off-line and reposition the continuous forms
in the printer.
3. Press the PARK button to move the front edge of the continuous forms backwards to
the Pin Tractors.
NOTE
> The ALARM indicator illuminates to indicate there is no paper present.
> If sprocket holes of the last page of the forms disengage from the
sprocket pins, do not attempt to eject the paper to avoid the possibility of
a paper jam.
4. Lift the Pin Tractor covers (1) and remove the forms.
5. Close the Pin Tractor covers.
S P
ETTING THE APER
There are 10 lever positions, the first 9 for printing purposes and the tenth to facilitate
ribbon replacement.
Set the Paper Thickness lever for different paper types as follows:
PAPER TYPE
Cut sheet paper
52 – 81 gsm
81 – 128 gsm
128 – 156 gsm
Envelope
Postcard
Carbon paper or Pressure-
sensitive paper (40 gsm)
2 part
3 part
4 part
5 part
6 part
See "Tearing off continuous forms" on page 21.
T
HICKNESS LEVER
Paper handling > 22
1
LEVER POSITION
1 2 3 4
X
X
X
X
X
X
X
X
X
X
5 - 9
See below
See below