Button Switches - Oki ML6300FB-SC User Manual

B
UTTON SWITCHES
SWITCH
SEL
SHIFT
LF
FF/LOAD
TEAR
PARK
SHIFT+SEL
SHIFT+LF
SHIFT+FF/LOAD
SHIFT+PARK
SHIFT+TEAR
STATUS FUNCTION
On-line Sets the printer to off-line.
Off-line Sets the printer to on-line and disalarms the
printer.
Used only in conjunction with one of the following
buttons: SEL, LF, FF/LOAD, PARK, TEAR described
below.
On-line Feeds paper by one line. Holding the button down
results in continuous line feeding.
Off-line Feeds paper by one line. Holding the button down
results in continuous line feeding.
On-line and off-line Continuous form fed until first line of next page.
Continuous Forms
mode
On-line and off-line Ejects the cut sheet.
Cut sheet manual
mode
On-line Delivers the continuous form to the cut position. If
Continuous Forms the button is pressed again or data is received, the
mode original form position is restored.
On-line Ineffective.
Cut sheet manual
mode
Off-line Ineffective.
Continuous Forms If the continuous form is in position, press to
mode retract the form to the Pin Tractors.
(If the sprocket holes of the last page of the form
disengage from the sprocket pins, do not attempt
to eject the paper as a paper jam may result.)
Enters menu mode.
Microfeed (0.14 mm step) down
Hold this button combination down for continuous
feeding or ejecting of paper.
Microfeed (0.14 mm step) up
Hold this button combination down for continuous
feeding or ejecting of paper.
On-line Ineffective.
Off-line Saves the set paper start position (first line print
position).
On-line Quieter print mode
Each press of the button pair progresses the printer
through Quieter print mode > High multipart print
mode > Normal print mode.
Off-line Ineffective.
Operating instructions > 25