Table of Contents
Advertisement
6.
If a paper fragment remains inside the printer:
(a)
use forceps to grip and extract it or
(b)
insert a triple folded sheet from the Paper Tray and turn the Platen Knob to pass
the folded sheet through and push out the paper fragment.
7.
When the paper jams are cleared, close the printer Top Cover.
8.
Set the Power Switch to ON.
C
ONTINUOUS FORMS JAMMED IN PRINTER
Do not carry out any operations inside the printer with the Power
Switch set to ON.
1.
Set the Power Switch to OFF.
2.
Tear off any unprinted continuous forms.
3.
Raise each Pin Tractor cover (1) and remove the continuous forms from the Pin
Tractors.
4.
Rotate the Platen Knob and remove the forms from the front or rear of the printer.
5.
If a form fragment remains inside the printer, place two or three forms in a stack on
the Pin Tractors and turn the Platen Knob to push the fragment out of the printer.
6.
Set the Power Switch to ON.
WARNING!
1
Troubleshooting > 36
Hide quick links:
Advertisement
Table of Contents
