Table of Contents
Advertisement
S
ETTING MENU VALUES
The following information explains the printer settings and how you can change them.
Printer items and their values are printed for reference.
C
ONFIRMING CURRENT SETTINGS
To print the current menu settings, use a cut sheet of A4 paper or continuous forms of width
at least 254 mm. In this example, a sheet of A4 paper is used.
1.
Set the Paper Type lever to cut sheet mode.
2.
Carry out one of the following:
(a)
If the printer power is OFF, while holding down the SEL button set the printer
Power Switch to ON.
(b)
If the printer power is ON, press the SHIFT and SEL buttons together.
3.
Place the cut sheet on the Paper Tray. The cut sheet is taken into the printer
automatically and the printer prompts you to request a menu settings print.
4.
Press the PARK button and the printer prints out all the menu items currently
selected and their corresponding settings.
5.
Exit or proceed to change menu settings:
(a)
To exit menu settings confirmation, save the current settings and eject the
paper, press the SHIFT and SEL buttons together.
(b)
To change menu settings, see
M
ENU SETTING
NOTE
Before changing menu settings, you may wish to print the current menu
settings as in
Set menu item values (printed out for reference as you proceed) as follows:
1.
Press LF (or SHIFT and LF together) to step forward (backward) through the menu
items to the required item.
2.
To change the setting for a selected item, press FF/LOAD (or SHIFT and FF/LOAD
together) to step forward (backward) through the setting values to the required
setting.
3.
Repeat steps 1 and 2 as required to change settings for other items.
4.
To exit menu setting, press SHIFT and SEL together to save the new settings and
exit menu setting mode.
NOTE
Switching the printer OFF does not save the new settings.
"Menu setting" on page 26.
"Confirming current settings" on page
Operating instructions > 26
26.
Hide quick links:
Advertisement
Table of Contents
