Erasing Individual Waypoints; Changing Waypoint Position - Furuno GP-1610CF Operator's Manual

11. Press the ENT key.
12. Press the MENU key twice.
Entering waypoints by event position
or MOB position
1. Press the WPT key.
2. Press the WPT key to select Evnt to WPT.
3. Press the ENT key. The event list appears.
EVENT LIST
No. LAT
MOB 3 2 5 9 . 8 9 2 ' N
0 0 1 3 2 5 9 . 9 5 4 ' N
: Cursor
Figure 7-8 Event list
4. Press or to selection position to en-
ter as a waypoint.
5. Press the ENT key.
6. Follow steps 4 through 9 in "Entering a
waypoint at own ship's position."
7.2 Erasing Individual
Waypoints
Waypoints can be erased by the cursor or
through the waypoint list.
Erasing waypoints by the cursor
1. Press the CURS key to turn on the cursor.
2. Operate the Cursor Pad to place the cur-
sor on the waypoint you want to erase.
3. Press the CLR key. The waypoint is erased
from both the screen and the waypoint list.
LONG
1 2 9 5 9 . 8 9 3 ' E
1 3 0 0 0 . 2 3 6 ' E
: Page change
MENU: Sel Mode
Erasing waypoints through the
waypoint list
1. Press the WPT key.
2. Press the WPT key again to select WPT
List.
3. Press the ENT key. The waypoint list ap-
pears.
4. Press or to select waypoint.
5. Press the CLR key. You are asked if you
want to erase the waypoint.
Are you sure?
ENT: YES
ESC: NO
6. Press the ENT key.
7. Press the MENU key twice.
7.3 Changing Waypoint
Position
You may change the latitude and longitude
position, waypoint shape and comments of
waypoints you have entered, through the
waypoint list.
1. Press the WPT key.
2. Press the WPT key again to display the
WPT List.
3. Press the ENT key.
4. Press or to select waypoint.
5. Press the ENT key. You are asked if it is
alright to overwrite the contents of the
waypoint.
Overwrite?
ENT: YES
ESC: NO
6. Press the ENT key. The edit display ap-
pears. Change data as necessary, follow-
ing "Entering waypoints by latitude and
longitude."
7-3