Lanier LW110 Operating Instructions Manual page 80

Troubleshooting
D
Hold the paper (B B B B ), and then slide the cutter (A A A A ).
Note
Slide the cutter one way only, otherwise paper waste may pile up inside
the machine.
E
Turn the knob anticlockwise about 1/4 to adjust the paper position.
5
F
Slowly rotate the paper roll until the edge of the paper is fed into the rub-
ber part of the roller (A A A A ). While feeding the flap of the paper roll into the
rubber part of the roller, turn the paper knob clockwise(B B B B ).
Note
Do not hold the paper knob from side. It may cause you touching a sticky
oil. For how to turn the knob without any harm, see the illustration below:
Make sure that the paper is not loose. Insert it straight into the roller.
68