Lanier LW110 Operating Instructions Manual page 148

Copy Settings
• Auto Energy Saver Mode(+10): The fusing unit needs to be hot for copying.
When the copier is idle, the fusing unit can be kept hot to save time or it can
be allowed to cool to save energy. This feature can be set to start automatical-
ly, but you can also turn it on yourself by pressing and holding the {Clear
Modes/Energy Saver} key for three seconds.
Note
0: None, 1: Yes
Default: 0
The machine can not enter the energy saving mode if toner end indicator
lights.
3
• Screen Message Setting(+11): When the copier is idle, the copy counter can
be made to display a message. There are five possible messages: "Pre_heat",
"Sleeping", "0123456789", Have a good day", and "Hello I love you". This fea-
ture can also be turned off.
Note
0: None, 1: "Pre_heat", 2: "Hello I love you", 3: "0123456789", 4: "Sleeping" ,
5: Have a good day".
Default: 0
• Leading Edge Increase/Decrease Adjustment Preliminary Interval(+12):
When changing a function setting (margin, multiple copies, or paper length)
by holding down the {+} or { } key, the setting will change by a preset value.
This value can be changed to 1, 2, 3, or 10 intervals.
Note
0: 3 intervals, 1: 1 interval, 2: 2 intervals, 3: 10 intervals
Default: 0
• Original Feed Out Waiting Time Setting(+13): When the copier is ready to
receive the paper, it will wait a preset length of time. If no paper is received
within this time, the copier ejects the original. The time can be set to 1, 2, 3, 4,
or 5 minutes. This function can also be turned off.
Note
0: 2mins, 1: 1min, 2: 3mins, 3: 4mins, 4: 5mins, 5: None
Default: 0
• Original Feed Start Time Setting(+14): You can set the number of seconds
before the rollers start to pull the original in. If the original is often fed ob-
liquely, you can solve the problem by setting a longer pause. The time can be
set to 1, 2, 3, 4, 5, 6, or 7 seconds.
Note
0: 1 sec, 1: 2 sec, 2: 3 sec, 3: 4 sec, 4: 5 sec, 5: 6 sec, 6: 7 sec
Default: 3
44