Preset Cutting - Lanier LW110 Operating Instructions Manual

Copying
H
After copying has finished, hold the original with one hand, press the
{ { { { Clear/Stop} } } } key, and then remove the original.
2
Note
To cancel copying, press the {Clear/Stop} key. The copier finishes the oper-
ation in progress, and delivers the copy and the original. Press the {Clear/
Stop}key to remove the original.
To call off on-going copying, for example, when you have inserted a wrong
blueprint, press the {Paper Select/Cut} key. The machine interrupts the op-
eration in progress, and delivers the copy and the original. Press the {Clear/
Stop} key to remove the original.

Preset Cutting

This function cuts roll paper to a selected length. The paper is cut to this length
regardless of the size.
Note
The default preset cut lengths are as follows. Metric Version: 1189mm,
841mm, 594mm, 420mm, 297mm Inch Version: 48.0", 42.0", 36.0", 24.0", 18.0",
11.0" To change the preset cut length pattern, please contact your service rep-
resentative.
A
Press the { { { { Paper Select/Cut} } } } key to turn on the Paper Select indicator.
24