Adding Toner - Lanier LW110 Operating Instructions Manual

Maintaining Your Copier

Adding Toner

When D is displayed, it is time to add toner.
When the indicator starts blinking, you can still copy about 53 feet of paper (16
1
m, 27 8 / " 11" size copies). When the indicator stays on, you can't copy until a
2
new cartridge is installed.
R WARNING:
• Do not incinerate used toner, toner bottle or toner cartridge.
• Toner dust might ignite when exposed to an open flame.
• Dispose of the used toner and the used toner cartridge ac-
4
R CAUTION:
• Do not eat or swallow toner.
• Keep toner (used or unused), toner bottle, and toner cartridge out
R CAUTION:
• This machine has been tested for safety using this supplier's
Note
If you use toner other than that recommended, a fault might occur.
When adding toner, do not turn off the main switch. If you do, your settings
will be cleared.
Always add toner after the machine instructs you to add toner.
Do not use used toner. This will damage the machine.
A
Lift the original table until it locks in place.
50
cording to local regulations.
of reach of children.
parts and consumables. We recommend you only use these
specified supplies.