Speaker - HP ProDesk 600 Maintenance And Service Manual
Maintenance and service guide - hp prodesk 600 g1 tower, hp prodesk 600 g1 small form factor
Hide thumbs
Also See for ProDesk 600:
- Hardware reference manual (112 pages) ,
- Quickspecs (58 pages) ,
- Illustrated parts & service map (4 pages)
Table of Contents
Advertisement
NOTE:
After installing a new processor onto the system board, always update the system ROM to
ensure that the latest version of the BIOS is being used on the computer. The latest system BIOS can be
found on the Web at: http://www8.hp.com/us/en/support-drivers.html.
Speaker
Description
Speaker
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Disconnect the speaker wire from the system board connector labeled SPKR (1).
4.
From the inside of the chassis, remove the Torx T15 screw (2) that secures the speaker to the front
of the chassis.
5.
Rotate the top of the speaker downward (3), and then remove it from the chassis.
To replace the speaker, reverse the removal procedures.
(Preparation for disassembly on page
(Access panel on page
38).
Spare part number
645330-001
37).
Speaker
73
- Quick Links:
- Tower (Twr)
- Small Form Factor (Sff)
Hide quick links:
Advertisement
Table of Contents
