HP ProDesk 600 Maintenance And Service Manual page 72
Maintenance and service guide - hp prodesk 600 g1 tower, hp prodesk 600 g1 small form factor
Hide thumbs
Also See for ProDesk 600:
- Hardware reference manual (112 pages) ,
- Quickspecs (58 pages) ,
- Illustrated parts & service map (4 pages)
Table of Contents
Advertisement
3.
Disconnect the power cable (1) and data cable (2) from the back of the hard drive.
4.
Release the drive by pulling the release tab away from the drive (1) and sliding the drive out of the
bay (2).
5.
Remove the four guide screws (two on each side) from the old drive. You will need these screws to
install a new drive.
62
Chapter 5 Removal and replacement procedures: Tower (TWR)
- Quick Links:
- Tower (Twr)
- Small Form Factor (Sff)
Hide quick links:
Advertisement
Table of Contents
