Expansion Card - HP ProDesk 600 Maintenance And Service Manual

Expansion card

Description
nVidia Quadro NVS310 PCIe x16 graphics card, 512 MB
nVidia Quadro NVS315 PCIe x16 graphics card, 1 GB
AMD Radeon HD8490 PCIe x16 graphics card, 1 GB
AMD Radeon HD8350 DH PCIe x16 graphics card, 1 GB DDR3
HP WLAN 802.11 a/b/g/n 2x2 PCIe module
HP WLAN/Bluetooth module
Intel PRO/1000 single port GbE NIC, includes bracket
The computer has three PCI Express x1 expansion slots and one PCI Express x16 expansion slot.
NOTE:
The PCI Express slots support only low profile cards.
You can install a PCI Express x1, x4, x8, or x16 expansion card in the PCI Express x16 slot.
For dual graphics card configurations, the first (primary) card must be installed in the PCI Express x16
slot.
To remove, replace, or add an expansion card:
1. Prepare the computer for disassembly
2. If the computer is on a stand, remove the computer from the stand.
3. Remove the access panel
4. Locate the correct vacant expansion socket on the system board and the corresponding expansion
slot on the back of the computer chassis.
94 Chapter 6 Removal and replacement procedures: Small Form Factor (SFF)
(Preparation for disassembly on page
(Access panel on page 86).
Spare part number
707252-001
720837-001
717219-001
717220-001
695915-001
733687-001
728562-001
85).